Figure 47. Memory Card Retention Post (Front); Figure 48. Main Power Connection - HP i2000 Owner's Manual

5. Remove the remaining three- (3) main power supply connectors from the rear of
the baseboard. Refer to Figure 49.
Power
Supply
Connectors
6. Remove the eight- (8) remaining screws securing the baseboard to the chassis
and then remove the baseboard from the system chassis. Refer to Figure 50 for
mounting screw locations.
90

Figure 47. Memory Card Retention Post (Front)

Figure 48. Main Power Connection

hp workstation i2000 owner's guide
Forward Memory
Retention Post
(Contains Cooling
Fan)
Power
Supply
Connector