General Installation Checklist - HP J class 3 Supplementary Manual

Hp j class 3: supplementary guide
Table of Contents

Advertisement

General Advice
Computer Room
#
Area or Condition
1.
Is access to the site or computer room restricted or secure?
2.
Is the computer room structurally complete?
3.
Is a raised floor installed?
4.
If there is a raised floor, can it hold 250 lbs (114 kg) per sq. inch?
5.
Is there provision for cable routing? (Raised floors may facilitate
cable routing).
6.
Do you plan to attach your own peripherals, such as mouse or
keyboard? If so, do you have your own cables for these devices?
7.
Is an elevator (lift) capable of lifting 1500 lbs (681 kg) available, if
required?
8.
Have you considered that any changes in or additions to your original
configuration requires additional cabling and space?
Lighting and Power
#
Area or Condition
9.
Are lighting levels adequate for maintenance and servicing?
10.
Are there additional AC outlets available for servicing needs?
11.
Are lightning arrestors installed?
12.
Is power conditioning equipment installed?
13.
Is there a dedicated branch circuit for the equipment?
14.
Is the dedicated branch circuit less than 250 feet (72.5 meters)?
Chapter 2

general installation checklist

The following table provides useful general advise to ensure that your
site is ready for the hp visualization center sv6 products.
planning your site
general installation checklist
Yes
No
Yes
No
27

Advertisement

Table of Contents
loading

Table of Contents