Removing A Drive From The Multibay - Compaq Evo D510 MT Hardware Reference Manual

Hardware Upgrades

Removing a Drive from the MultiBay

2–28
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the Compaq Web site at
www.compaq.com.
1. Exit all software applications, shut down the operating system
software, and turn off the computer if you are inserting or
removing a hard drive.
2. Remove the MultiBay security screw, if it has been installed.
Refer to the"Uninstalling the MultiBay Security Screw" section
for instructions on removing the MultiBay security screw.
3. Slide the eject lever to the left to eject the drive from the
MultiBay.
Hardware Reference Guide