Flymo SAMURAI 1000XT Original Instructions Manual
Hide thumbs
Also See for SAMURAI 1000XT:
- Original instructions manual (80 pages) ,
- Instruction manual (52 pages) ,
- User manual (10 pages)
Related Manuals for Flymo SAMURAI 1000XT
Summary of Contents for Flymo SAMURAI 1000XT
- Page 1 SAMURAI 1000XT Original Instructions AUTOMATIC SPEED CONTROL FOR YOUR SAFETY AND COMFORT For all customer enquiries or for replacement parts, contact:- ¤ 01325 302302 www.flymo.com customer.services@husqvarna.co.uk...
-
Page 2: Carton Contents
Guard (with bolt and nut) Steady Handle IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct:- Telephone : 01325 302302... - Page 3 3-pin plug. CONNECTORS 5. If in doubt consult your local Service Repairer or Flymo connectors are suitable for use with 2 core cable qualified electrician before the machine is used. only. Under no circumstances should these connectors 6.
-
Page 4: Assembly Instructions
Assembly Instructions Switch Handle and Handle Tube Assembly (A), (B) & (C) 1. Loosen the four bolts on the Handle Clamp (A). 2. Insert the Switch Handle and the Steady Handle into the holes at the side of the Handle Clamp (B1 Right Handed) (B2 Left Handed) - using the Hex Drive Tool to turn the switch handle (B3) 3. -
Page 5: Cutting Head
Line Feed The length of nylon line wears down naturally as you work. When this happens, tap the Cap (M1) on the ground while it is turning. A further length of line will automatically be fed out. The line cutter in the guard then ensures the AUTO line is cut to the optimum length. -
Page 6: Maintenance
Cutting Head cont’ To fit nylon line only: • Remember ! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 2mm. Use only genuine Flymo nylon line. 1. Take approximately 7 metres of line. Place the centre of the line into the slot in the middle of the spool (T1) enabling 3.5 metres of line to be wound... -
Page 7: Fault Finding Chart
Fault Finding Chart WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment. FAULT CHECK ACTION Remove cap and spool, free line Is the line fed out and visible? LINE NOT FEEDING Has line been removed from and re-fit spool and cap. -
Page 8: Ec Declaration Of Conformity
EC Declaration of Conformity Husqvarna UK Ltd., Aycliffe Industrial Park Newton Aycliffe, Co. Durham, DL5 6UP, England Declare under our sole responsibility that the product(s); Category........Battery Lawn Trimmer Model(s)......... TMET1000XT Identification of Series....See Product Rating Label Year of Construction...... See Product Rating Label Complies with the essential requirements &...