Installing The Cable Lock Provision - HP Deskpro EN Supplementary Manual

Installing the Cable
Lock Provision
3-26 Upgrading the Computer
The cable lock provision consists of a three-piece security
bracket. The bottom part of the bracket is attached to the
computer with a screw; the top part of the bracket covers the
screw and prevents its removal.
1. Separate the pieces of the security bracket 1 by bending
the metal where the three pieces join.
2. Slide the tab on the narrow bracket 2 into the notch on the
back of the computer, then slide the U-shaped bracket 3
between the narrow bracket and the computer.
3. Secure the bracket with the screw provided 4.
4. Cover the screw with the flat portion of the bracket 5.
5. Install a lock 6 (not provided) to secure the top part of the
security bracket and inhibit access to the inside of the
computer. Install a cable lock (not provided) to inhibit
access to the inside of the computer and secure the
computer to a fixed object.
Attaching a Cable Lock