Removing The Expansion Board Cage - HP Deskpro EN Supplementary Manual

Removing the
Expansion Board
Cage
3-8 Upgrading the Computer
To remove the expansion board cage:
1. If you have locked the Smart Cover Lock, use
Computer Setup to unlock it.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet, and
disconnect any external devices.
4. Remove the computer cover.
5. Pull the expansion board cage straight up to remove it from
the chassis.

Removing the Expansion Board Cage

When reinstalling the expansion board cage, ensure that
the tab on the brace latches into the slot on the side of the
power supply.