HP Deskpro EN Supplementary Manual page 22

2-2 Using Network Communications
To alter the boot order, run Computer Setup. See the
Software Reference Guide for instructions.
The Integrated Compaq 10/100 TX NIC Intel WOL UTP PCI
Controller automatically senses the data throughput speed of the
network, 10Base-T or 100Base-TX, and configures itself
appropriately.
100 Base-TX operation requires the use of a Category 5
UTP cable with an RJ-45 network connection.
The controller also supports Remote Wakeup and Remote ROM
Flash. These features allow the system administrator to power
on a client computer, or to safely upgrade a client computer's
Read Only Memory (ROM), from a remote location through the
use of supported PC LAN management tools.
For more information on Remote Wakeup and Remote
ROM Flash, refer to the Software Reference Guide or to
the online Remote Management Guide. The Remote
Management Administrators Guide is included with the
Remote Management Administration Tools, and is
available on the Support Software CD for Compaq
Desktop, Portable, and Workstation Products or at the
Compaq Web Site at www.compaq.com.