Removing A Drive From The Drive Bay - Compaq Deskpro EC User Manual

Removing a Drive from the Drive Bay

4–14 User's Guide
1. Complete the steps in the "Opening Your Computer" and
"Removing the Front Bezel" sections of this chapter.
2. Disconnect the drive power and signal cables.
✎
If you are disconnecting a CD-ROM or DVD-ROM drive,
disconnect the audio connector.
3. Remove the screws from the side of the drive bay, as shown in the
previous figure.
4. Remove the drive from the drive bay, and store it in anti-static
packaging.
5. If necessary, replace the bezel blank.
Ensure that the aligning pins and any remaining bezel blanks are
in their proper orientation.
Removing a Drive from the 5.25-inch Drive Bay