Ending A Connection - HP Compaq t1010 User Manual

24
Chapter 5
Table 3-5 identifies and describes each of functions of the properties sheet.
Table 3-5 Connections Properties Sheet
Function
Connection Name
Type
Status
Connect
End
Shutdown

Ending a Connection

Click on the End command button to end the connection process. When you press
the End button and the connection is active, the End Task dialog displays. The
End command button is enabled when one or more sessions become active.
Note
The Connections properties sheet is the default sheet
displayed by the Winterm Connection Manager.
Description
This application window lists the connections that you
can use. Default RDP Connection and Default ICA
Connection are the default connections for the
window.
Note
See the administrators guide for information
about creating connections.
This list shows the type of connection. The defaults are
RDP and ICA.
This list shows the status of the connection. If a
connection is live, the status for that connection will be
Active. If a connection is not live, the list will show a
blank.
Click on a connection in the Connection Name list
box to highlight it. Click on the Connect command
button to make the highlighted connection. You can
also double-click on a selection to make a connection.
See Ending a Connection.
See Shutting Down the Terminal.