Ending A Connection - HP Compaq t1010 User Manual

Managing Connections
Table 5–1 identifies and describes each of functions of the
properties sheet.
Table 5–1:
Function
Connection Name
Type
Status
Connect
End
Shutdown

Ending a Connection

Click on the End command button to end the connection process.
When you press the End button and the connection is active, the
End Task dialog displays. The End command button is enabled
when one or more sessions become active.
5–2
Connections Properties Sheet
Description
This application window lists the connections that
you can use. Default RDP Connection and
Default ICA Connection are the default
connections for the window.
✎
This list shows the type of connection. The
defaults are RDP and ICA.
This list shows the status of the connection. If a
connection is live, the status for that connection
will be Active. If a connection is not live, the list
will show a blank.
Click on a connection in the Connection Name
list box to highlight it. Click on the Connect
command button to make the highlighted
connection. You can also double-click on a
selection to make a connection.
See Ending a Connection.
See Shutting Down the Terminal.
See the administrators guide for
information about creating connections.
User's Guide