7-10
Hardware Upgrade Preparations
Extending the Drive Cage
The slide-out drive cage allows access to all drive positions for easy installation
of additional drives, with no drive rails or brackets required. With the drive
cage slightly extended from the chassis, you can easily connect the drive power
and signal cables.
To slide out the drive cage:
1.
2.
3.
NOTE:
When installing optional drives, you must install one guide screw to
ensure the drive will line up correctly in the drive cage. Compaq has provided
extra guide screws, installed in the front of the workstation chassis, behind the
front bezel.
CAUTION:
bezel, make sure that the workstation is turned off and that the
power cord is disconnected from the electrical outlet.
Turn off the workstation and any external devices.
Disconnect the power cord from the electrical outlet.
Remove the following components:
workstation cover
front bezel
Before removing the workstation cover and front