Led Status Indication - Olympus DP23 Instruction Manual

DP23/ DP28/ with DP2-AOU
Alternatively, Olympus provides a special control unit, DP2-AOU, for
DP23 / DP28. DP2-AOU replaces a computer. The software for
controlling DP23 / DP28 is pre-installed on DP2-AOU.

2.3 LED status indication

A blue LED is located on the front of the camera. After starting the
software, the LED indicates the following statuses:
LED
The LED flashes.
The LED flashes continuously.
The LED lights up continuously.
The LED doesn't light up.
2 The DP23 / DP28 camera
Status
The camera is being initialized.
There is a camera error. Contact
Customer Service (see page 26).
The camera is ready.
The camera is not connected to the
computer or DP2-AOU port.
The camera is not connected to the
USB 3.1 port.
9