Printing The Nozzle Check Pattern - Canon S820D Quick Start Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern and check whether inks is being ejected properly from the
print head nozzles and whether the print head is correctly positioned.
Note
You can also print the nozzle check pattern by pressing the Reset button of the printer.
Follow the procedure below.
1
Check that the printer is on.
2
Load A4-size plain paper.
3
Keep the Reset button pressed down, and release it when the power
lamp blinks twice.
1
2
50
1
Check that the printer is on.
2
Load A4-size paper.
3
Press the Maintenance button.
The
Sheets.
4
Press the
The
5
Press the Print button.
Nozzle check pattern is printed. When printing
ends, the
6
Press the Maintenance button.
7
Check the nozzle check pattern.
If pattern 1 is broken, the print head must be
cleaned. See "Cleaning the Print Head" on page
51.
If the vertical lines in pattern 2 stand out, the
print head position must be adjusted. See
"Adjusting the Print Head" on page 20.
icon appears in Required
(right) button once.
icon appears.
icon appears.