Canon S820D Quick Start Manual page 35

Adjusting the Brightness and Contrast
The brightness and contrast of the viewer display can be adjusted from maintenance mode.
Adjusting the Brightness
1
Check that the printer power is on.
2
Insert a memory card to which JPEG
data has been saved (see page 28).
3
Press the Maintenance button.
The
Sheets.
4
Press the
The
5
Press the Print button.
The
Image.
6
Adjust the brightness by using the
(left) and
You can adjust the brightness within the following
setting range by operating the buttons. The base
setting is 0.
: As the number increases in the negative
direction, the brightness becomes darker
(-1 to -9).
: As the number increases in the positive
direction, the brightness becomes brighter
(1 to 9).
7
Press the Print button.
The data is displayed in the viewer at the
brightness that was set.
To exit Maintenance mode, press the Maintenance
button.
icon appears in Required
(right) button five times.
icon is displayed.
icon appears in Optimize
(right) buttons.
33