Removing The Roll From The Printer; If Roll Paper Jams - Canon imagePROGRAF iPF6300S Basic Guide No.1 Basic Manual

Removing the Roll from the Printer

Remove rolls from the printer as follows.
• Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer
will be unable to keep track of the amount of roll paper left.
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
• If you need to cut a roll, see the following procedure.
(→"Specifying the Cutting Method for Rolls," User's Guide)
1
On the Tab Selection screen of the Control Panel , press
◄ or ► to select the Paper tab (
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper , and then press the
OK button.
4
Press ▲ or ▼ to select Yes , and then press the OK
button.
The roll is now rewound and ejected.
• If you have selected ManageRemainRoll > On in
the Control Panel menu, a barcode is printed on the
leading edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left. (→"Keeping Track of the Amount of Roll
Paper Left," User's Guide)
5
Open the Roll Feed Unit Cover .
).
18
Ready
OK: Paper Menu
Plain Paper
ISO A2 Roll