Changing Shooting Functions - Canon PowerShot S90 User Manual

Changing Shooting Functions

If you set the mode dial to G, you can change the settings in the 4 tab
(p. 48).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 166 – 169).
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
Changing the Flash Timing
You can change the timing for the flash and shutter.
150
Choose [AF-assist Beam], then press the qr
●
buttons to choose [Off].
Choose [Flash Settings] and press the m
●
button.
Press the op buttons or turn the Ê dial to
●
choose [Shutter Sync.] and press the qr
buttons to choose a setting.
The flash fires right after the shutter
1st-curtain
opens.
The flash fires right before the shutter
2nd-curtain
closes.