Customizing Display Information - Canon PowerShot S90 User Manual

Changing Shooting Functions

Customizing Display Information

You can change which information is displayed by switching between
custom displays with each press of the l button.
If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
Gray items can also be set, however, they may not display depending on
the Shooting mode.
152
Choose [Custom Display], then press the m
●
button.
Press the opqr buttons or turn the Ê dial
●
to select an item and press the m button to
put a mark on items you would like to
display.
Items with a
●
To turn off a custom display, choose
and press the m button. A
appear.
However, the custom display currently being
used in the shooting screen cannot be turned
off.
Displays shooting information
Shooting Info
(p. 44).
Grid Lines A grid overlays the display.
The areas outside the 3:2 range are
grayed out. This area will not print
3:2 Guide
when printing on paper with a 3:2
aspect ratio.
Histogram displays in shooting
Histogram
modes G, M, B, D.
will display.
mark will
or