Changing Shooting Functions
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the
[E
button when in a shooting mode (p. 27). You can set the retraction time to
[0 sec.].
.-
Select [Lens Retract], then press the
~ ~
buttons to select [0 sec.].
..•
~
. •
I l.·CI.n.g·i·.~·gl
• • • •
$ho~t·I··"g
···Fiirietibns
If you set the mode switch to
0,
and the mode to
P,
you can change the
settings in the
0
tab (p. 48).
BeforEr:attemptimg~9shoot
usingafunCtiorr explained in this chapter in
modes (jlherthanl'mode,GDeck
ifttl~flJnction
is available in those
f1'lpdes~(pp.1l:t8:-
151).i<
>< ...
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
---
-
_.
------
Select [AF-assist Beam], then press the
~ ~
buttons to select [Off].
136