Choosing the Person to Focus On
(Face Select)
You can choose a specific person's face to focus on and then shoot.
Frame
Confirming the number of detected faces
Keeping the
camera (35 at the most) (orange: main subject's face, white: detected face).
Cannot be used when in t, Stitch Assist or Movie modes.
88
Register 0 to the
(p. 153).
Set Face Select mode.
●
●
●
Choose the face on which to focus.
●
●
Shoot.
●
●
button pressed will display the number of faces detected by the
Point the camera toward the face of the
subject and press the
After [Face Select : On] displays, a white
face frame
will appear around the face
detected as the main subject.
Even if the subject moves, the face frame
will follow the subject within a certain
range.
If a face is not detected,
If you press the
will move to another face detected by
the camera.
When the frame has scrolled through all
the detected faces, [Face Select: Off] will
display, and face select will be disabled.
Press the shutter button halfway. The face
frame of the chosen face will change into
a green
.
Press the shutter button fully to shoot.
button
button.
will not appear.
button, the face frame