Changing The Image Display Time; After Shooting - Canon PowerShot S90 User Manual

Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.

Changing the Image Display Time

You can change the length of time the images display directly after shooting.
Changing the Way the Image Displays Right

After Shooting

You can change the way the image displays after shooting.
Choose [Flash Settings], then press the m
●
button.
Press the op buttons or turn the Ê dial to
●
choose [Red-Eye Lamp], then press the qr
buttons to choose [Off].
Choose [Review], then press the qr buttons
●
to choose an option.
2 – 10 sec. Displays images for the set time.
The image displays until you press the
Hold
shutter button halfway.
Off No image displays
Choose [Review Info], then press the qr
●
buttons to choose an option.
Off Displays the image only.
Detailed Displays detailed information (p. 45).
The area inside the AF frame is
magnified, allowing you to check the
Focus Check
focus. The procedure is the same as in
"Checking the Focus" (p. 122).
Changing Shooting Functions
151