How To Use Patchcode Sheets - Canon imageFORMULA DR-X10C User Manual

How to Use Patchcode Sheets

This section describes how to use patchcode sheets with
CapturePerfect 3.0.
1.
Print the patchcode sheets on a printer.
IMPORTANT
• Print (at original size) PATCH T (A4) and PATCH II (A4)
sheets on A4 paper, or PATCH T (LTR) and PATCH II (LTR)
on LTR paper.
• The scanner may not recognize the patchcodes if they are
enlarged or reduced.
2.
Insert the patchcode sheet in front of the document
that you want to save as a separate file before
placing the documents on the scanner.
Insert patchcode sheets in front of
the documents you want to save as
separate files.
3.
On the [Other] tab of the ISIS driver properties, select
[Patchcode] from the Batch Separation drop-down
list.
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch
separation setting is not displayed.
p. 8-20.)
4.
Perform scanning with batch separation enabled.
5.
Set the [Type of batch separation] setting to [Scan,
Continue Scanning] or [Skip, Continue Scanning].
Hint
• If [Scan, Continue Scanning] is selected or if the patchcode is
PATCH ll type, the patchcode sheet image is also saved and
scanning continues.
• If [Skip, Continue Scanning] is selected and the PATCH T
pattern is detected, the patchcode sheet image is not saved
and scanning continues.
■ Creating a Patchcode Sheet
To copy a patchcode pattern to create a different size
patchcode sheet, make sure to pay attention to the
following precautions:
IMPORTANT
• Adjust the patchcode so that it fits into the effective area for
detecting patchcode patterns.
0.2" (5 mm)
Patchcode Patterns
(Effective area for detecting
patchcode patterns.)
• When copying a patchcode pattern, the copy should be the
same size and print density as the pattern on the original.
Extremely dark or light copies may not be scanned correctly.
• Be careful to keep patchcode sheets clean. If a patchcode
sheet has been folded or becomes creased, reprint or replace
the sheet.
3-20
Chapter 3 Basic Operation
(See "Batch Separation" on
0.2" (5 mm)