Preparing The Document Eject Tray; Eject Paper Stoppers - Canon imageFORMULA DR-X10C User Manual

Preparing the Document Eject Tray

The Eject Tray includes two Document Eject Guides, the
Eject Tray Extension and Eject Paper Stopper, to be adjusted
to match the length of your documents.
■ Document Guides
Slide the document eject guides to match the width of your
documents.
Hint
• The position of the document eject guides can be shifted to the
left or right by holding one guide in place while moving the
other.
• To reset the guides so that they are equidistant from the
center, spread the guides all the way to the left and right.
■ Document Eject Tray Extension
Pull out the tray extension to match the length of your document.

■ Eject Paper Stoppers

Raise the appropriate Eject Paper Stopper to stop ejected
documents from spilling out of the eject tray.
Hint
The eject paper stoppers are attached to the document tray
extension, so you can adjust their positions by moving the tray
extension to suit your document length.
3-11
Chapter 3 Basic Operation