Ftxl Control Module; Status Display Screens - Lochinvar FTXL 1000 Installation & Operation Manual

Hide thumbs Also See for FTXL 1000:
Table of Contents

Advertisement

11
Operating information
Sequence of operation
Use the control panel (FIG. 12-1) to set temperatures, operating conditions, and monitor boiler operation.
Figure 12-1 Control Panel
HOME
VIEW
SETUP
INFORMATION
SETTINGS
The Status Section is located on the top left of the screen
and displays how the unit is currently running (i.e. Off,
Stand-by, Blocking, and Lockout) including: current
driving demand, the next Hot Water Setback scheduled,
the reason for any blocking or lockout, and a power button.
The Demand Section is located on the bottom left of the
screen and displays information about the targets and
limits of the current demand being serviced.
The Modulation Section is located on the top right of the
screen and displays the target modulation of the unit. This
section also includes target and actual fan speeds.
The Sensor Section is located on the bottom right of the
screen and displays both factory installed and field installed
sensor including: Outdoor Air, Hot Water Temperature,
System Supply, System Return, Inlet Water, Delta T, Outlet
Water, Flue Temperature, and Flame Current.
65

FTXL control module

Installation & Operation Manual
The Navigation Section is located down the left side of the
screen.
There are five (5) sections located below the
Lochinvar icon:
Home, View, Setup, Information
(About), and Settings. The Home Section is the screen
shown above. The View Section provides more detailed
information including subsections for: History, Cascade,
Graphing, and a complete list of current Sensor Values.
The Setup Section has several screens to aid in setting
up the appliance. The Setup Section includes screens for
adjusting: Set Points, Pump Settings, Cascade, BMS, Ramp
Delay, and Night Setback.
provides information about the hardware and software
including the current software version of the interface, the
version of the boiler control, and the CON·X·US device
serial number. The Setting Section enables several interface
setup features including: Time Setup, Temperature Unit
Select, Loch'n Link, System Update, and WiFi Setup.
The Information Section

Advertisement

Table of Contents
loading

Table of Contents