Specifications - Stihl SHA 56 Instruction Manual

English
Fault LEDs on the
battery
3 LEDs light
up red.
4 LEDs flashing
red.
The vacuum 3 LEDs light
shredder cuts out up red.
during operation.
The suction
power is too low.
The runtime of
the vacuum
shredder is too
short.
Charging does 1 LED emits
not start when red light.
the battery is
inserted into the
charger.

20 Specifications

20.1 Vacuum Shredder STIHL
SHA 56
– Approved battery: STIHL AK
– Blowing force: 8 N
– Maximum air velocity: 56 m/s
– Air throughput vacuum shredder 510 m³/h
– Volume catcher bag: 40 l
– Weight vacuum shredder without battery:
4.2 kg
– Weight blower without battery: 3.2 kg
The running time is shown at www.stihl.com/
battery-life.
32
Cause
The vacuum shredder
is too hot.
There is a fault in the
battery.
No electrical contact
between the vacuum
shredder and the bat‐
tery.
The vacuum shredder
or battery is damp.
The vacuum shredder
is too hot.
There is an electrical
fault.
The vacuum shredder
is clogged.
The catcher bag is full
or dirty.
The suction tube or
blower wheel is clog‐
ged.
The battery is not fully
charged.
The battery service
life has been excee‐
ded.
The battery is too
warm or too cold.
20.2
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
20.3
K-value (uncertainty) for sound pressure levels is
2 dB(A). K-value for sound power levels is 2
dB(A). K-value for vibration level is 2 m/s².
Remedy
► Remove the battery.
► Wait for the vacuum shredder to cool
down.
► Remove battery and reinsert it.
► Switch the vacuum shredder on.
► If 4 LEDs continue to flash red: Do not
use the battery and contact your STIHL
dealer for assistance.
► Remove the battery.
► Clean electrical contacts in the battery
compartment.
► Insert battery.
► Allow the vacuum shredder or battery to
dry.
► Remove the battery.
► Wait for the vacuum shredder to cool
down.
► Remove battery and reinsert it.
► Switch the vacuum shredder on.
► Remove the battery.
► Clean the vacuum shredder.
► Remove the battery.
► Empty the catcher bag.
► Clean the catcher bag.
► Remove the battery.
► Clean the vacuum shredder.
► Fully charge the battery.
► Replace battery.
► Leave battery inserted in charger.
Charging starts automatically as soon as
the permitted temperature range is rea‐
ched.
STIHL AK Battery
Sound Values and Vibration
Values
20 Specifications
0458-828-9821-B