Remote Controller - JVC KW-M788BH Instruction Manual

Settings Settings
<System Information>
Update the system by connecting a USB device
containing an update file.
• To obtain the update file, visit
<https://www.jvc.net/cs/car/>.
Connect a USB device with the update file to the unit.
System Information
Application Version Vxxx
Update
System Version Vxxx Update
GNSS Version Vxxx
Update
HD Radio Version Vxxx
Update
Update starts. It may take a while. If the update has
been completed successfully, "Update Completed.
Please Ignition OFF" appears.
<Application Version>
Updates the system application.
<System Version>
Updates the system.
<GNSS Version>
Updates the Global Navigation Satellite firmware.
<HD Radio Version>
(Only for KW-M788BH)
Updates the HD Radio firmware.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the ignition switch off
then on, and retry the update.
52 ENGLISH
<Open Source Licenses>
Shows the Open Source Licenses.
<Key Customize>
You can select four items to display on the pop-up
function menu (page 12).
1
Select the item you want to replace.
Key Customize
FNC
Key1 Key2 Key3 Key4
Settings Background Screen
Camera
Adjustment
2
Select an item (1) you want to display,
and then touch [ × ] (2) to set.
Key Customize
FNC
Key1 Customize
Key1 Key2 Key3 Key4
Settings
Equalizer
Settings Background Screen
Camera
Adjustment
Sound Effect
Fader / Balance
X'over
3
Repeat steps 1 and 2 to replace the other
items.

Remote Controller

Remote Controller
To use the remote controller, purchase optional
remote controller, RM-RK258.
• When using the remote controller, refer also to
the instruction manual supplied with the remote
controller.
Remote sensor*
* DO NOT expose the remote
sensor to bright light (direct
sunlight or artificial lighting).