5.2.12. Opener Piece, Drive Rack Arm, Pinch Arm Unit, P5 Arm Unit, and Intermediate
Gear A
5.2.12.1. Reassembly Notes
1. Installation/Alignment of Intermediate Gear A, Lift Gear and P5 Arm
Unit
A. Rotate the Lift Gear so that Hole A on Lift Gear is a Through Hole
with a hole on chassis.
B. Install the Intermediate Gear A so that the hole on Intermediate Gear
A is aligned with the hole on Lift Gear.
Fig. J10-1
38