7. Installation of Cassette Up Ass'y
A. Confirm that the Locking Tab under the Cassette Up Ass'y is in Hole
on the Mechanism Chassis when installing the Cassette Up Ass'y.
Then, slide the Cassette Up Ass'y towards the back.
B. When installing 2 Screws (502), slide the Holder Unit (Refer to
"WHEN LOADING WITHOUT A CASSETTE" in Service Notes) to
tighten screws. Then, slide it back to the EJECT Position.
C. Hook Spring to the Drive Rack Arm on the Mechanism Chassis.
5.2. MECHANISM SECTION
5.2.1. Disassembly/Reassembly Method
26