Panasonic PV-D4733S-K Service Manual page 128

Method -1:
1. Move the Pinch Roller Unit out by unhooking the Pin of Pinch Arm Unit
so that the Pinch Roller is separated from the Capstan Rotor Unit shaft.
2. Remove the tape from the tape path.
3. Rewind the tape into the cassette by rotating the Center Clutch Unit
counterclockwise.
4. Unhook Spring (A) of the Drive Rack Arm.
5. Remove Screw (A).
6. Lift the Cassette Up Ass'y. While pulling the Cassette Up Ass'y out far
enough so that it clears the Drive Rack Arm, slide the Drive Rack Unit
as indicated by the arrow to remove the cassette tape from the
Cassette Up Ass'y.
7. Check the cause of mechanical trouble and repair.
Fig. 11-1
Fig. 11-2
Fig. 11-3
16