Table of Contents
Advertisement
transparent film or tracing paper.Then adjust the convergence.
When replacing one of the CRT's.
Adjust the convergence for each of the 50/100Hz and 60/120Hz inputs so that they are aligned
with the other colours.
Helpful Hint
All positions which have been adjusted are recorded within P-2 for NTSC data and P-3 for PAL
data of the memory.This data can be copied to P-4 memory area, allowing you to perform the
adjustment of P-2 (NTSC) and P-3 (PAL).To perform these adjustments,push the SEARCH
button on the remote control, and manipulate the position [
] and [
] button and the "N"
button as instructedby the On Screen Display in Fine Convergence adjustment.
All of the Convergence Control Charts have been listed for the remote control buttons after the
Convergence Adjustment Procedure Please refer to these.(Page 29 and 30)
10.1. Convergence Adjutment Sheet
1. PAL (100i & 50p)
2. NTSC (120i & 60p)
3. 1080i
44
Advertisement
Table of Contents
