Table of Contents
Advertisement
8. Deflection Adjustment
Caution
1. The following adjustment have to be carried out one with PAL
signal (100i/50p) and with NTSC signal (60p/120i) .
2. Deflection adjustment need to set the Coarse/Fine Convergence
to Zero Correction some time.
3. Before Deflection Adjustment are attempted, CRT Set up,
Electrical Focus and Optical Lens Focus adjustment must be
completed.
8.1. PAL 100Hz mode (100i)
8.1.1. Preparation
1. Receive PAL monoscope pattern.
2. Set scan mode to 100Hz.
3. Set the Picture Menu to NORMAL.
4. Set the TV to Service Mode 1.
5. Set Aspoct to "1619".
6. Push [ 0 ] button so that set the Data of Coarse/Fine Convergence
to Zero Correction.
7. Push [ HELP ] button so that projecting Green only.
8.1.2. H-Pos and H-Amp Adjustment
1. Adjust Monoscope pattern for center of the screen by H-Pos
control.
2. Adjust Horizontal amplitude for 2.5 ±0.1 division of a scale by H-
Amp control.
29
Advertisement
Table of Contents
