1. Receive PAL cross hatch pattern.
2. Adjust the vertical line to straight line by Parabola control.
3. Adjust the vertical line to straight line of both side Vertical line by
Trapezoid control.
8.2. PAL Progressive mode (50p)
8.2.1. Preparation
1. Receive PAL monoscope pattern.
2. Copy the Data of PAL 100Hz mode (100i) to PAL Progressive
mode (50p)
3. Set scan mode to progressive.
4. Set the Picture Menu to NORMAL.
5. Set the TV to Service Mode 1.
6. Set the Data of Service Mode 1 as follow
7
H-Parallel
V-Linear
36
Top-Corner
21
7. Push [ 0 ] button so that set the Data of Coarse/Fine Convergence
to Zero Correction.
8. Push [ HELP ] button so that projecting Green only.
8.2.2. V-Amp, V-Linear and V-Pos Adjustment
1. Adjust Vertical amplitude for 2.5 ± 0.1 division of a scale by V-
Amp control.
Bottom-
21
Corner
V-S-Correct
10
C-Correct
4
31