Adjustment Procedure - Panasonic BT-S1315DA Service Manual

file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0410030000.html

4.10.3 Adjustment Procedure

TOP PREVIOUS NEXT
1. Input a crosshatch pattern signal.
2. Set the SCREEN control to its minimum.
3. To display a horizontal single line, set the monitor to the FACTORY mode, then V
COMPRESS on the menu to ON, and then select MENU OFF.
4. Adjust the BRIGHT control to obtain A=140 V±2 V.
5. Adjust the SCREEN control so that the horizontal single line can be barely visible.
Note:
6. After this adjustment, never turn the SCREEN control.
7. To cancel the horizontal single line, press the MENU/ENTER switch.
•@
TOP PREVIOUS NEXT
file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/s0410030000.html [2006-02-04 08:28:42]