Panasonic KX-TD816JT Features Manual page 47

Number in
the
example
(2) Time
(3) Ext (Extension)
CO (Outside line)
(4)
Dial Number
(5)
Duration
(6)
Acc Code
(7)
(Account Code)
(8) CD
(Condition Code)
Cost
(9)
Cost
(10)
Conditions
• Connect a printer to the Serial Interface (RS-232C) connector of the main unit. After
connecting a printer, do not press the RETURN key, if provided on the printer, for 10
seconds.
• When programmed for outgoing toll calls only, printing occurs only for calls which start
with the numbers stored in any Denied Code Table from levels 2 to 6. If Automatic Route
Selection (ARS) is employed, the modified number is checked against these tables.
• This system can store information of up to 100 calls. If more calls are originated or received,
previous records are deleted starting with the oldest one.
• It is possible to select whether the SMDR prints out the account code <[990] System
Additional Information, Area 06-Bit 2>. If it is printed out, it is shown in dots.
• SMDR for Hotel Application:
SMDR also records and prints out details for the Hotel Application function: check-out
information and Timed Reminder information.
• SMDR data is not deleted when you reset the system.
Features Guide
Item
Shows the end time of a call as Hour / Minute.
Shows the extension number, floating number, etc., which was
engaged in the call.
Shows the outside line number used for the call.
Outgoing call: shows the other party's telephone number (regular call
record: maximum 30 digits, charge or meter call record: maximum of
20 digits). Valid digits are 0 through 9, , #, P (if the PAUSE button is
pressed), or the mark "=" (if a host PBX access code is entered).
Received call: shows <INCOMING> and <I>.
Shows the duration of the call in Hours / Minutes / Seconds.
Shows the account code appended to the call.
Shows call handling type with the following codes:
TR: Transfer
FW: Call Forwarding to Outside Line
D0: Non Security Outside Line Access using Direct Inward System
Access (DISA)
D1 through D32: DISA User Codes 1 through 32
RM: Remote access to a modem
Shows the charge.
Shows the meter.
Explanation:
Description
1.3 System Features
47