Outgoing Message (Ogm) - Panasonic KX-TD816JT Features Manual

1.3 System Features

Outgoing Message (OGM)

Description
Allows the extension assigned as an operator to record outgoing voice messages. There are
three types of outgoing messages that can be recorded.
After recording these messages, the operator can also play them back for confirmation.
Message Type
Direct Inward System
Access (DISA)
Uniform Call
Distribution (UCD)
Timed Reminder
Conditions
• Outgoing messages are numbered as follows:
OGM Number
• A DISA Unit for the KX-TD816 or a DISA Card for the KX-TD1232 is required to
programme the OGM. One unit or card can be installed per system. System Connection
permits two DISA Cards. If there are two DISA Cards, the same message is recorded for
both simultaneously.
• It is possible to select a maximum recording time of 0/16/32/64 seconds for each message.
The total length must be under sixty four seconds. <[215] Outgoing Message Time>
Installation Manual References
• 2.4.6 DISA Card / Unit and Remote Card / Unit Installation
Available for the KX-TD1232 only.
*1
38
Played when a caller accesses the DISA feature. There can be
two different DISA messages.
If assigned in the UCD Table, this message is played when all
extensions in an UCD group are busy or not available.
There can be four different UCD messages.
Used in Timed Reminder. When answering the Timed
Reminder alarm (often used as a wake-up call), the user will
hear this message. There can be only one Timed Reminder
message.
OGM 1 DISA message 1 or UCD message 1
OGM 2 DISA message 2 or UCD message 2
OGM 3 Timed Reminder message or UCD message 3
OGM 4 UCD message 4
Description
Assignable Message
*1
Features Guide