Removing the Front Bezel
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as diskettes or compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION
board as long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the computer.
5.
Remove the access panel.
6.
Press the green latch behind the upper right side of the bezel (1) and pull the right side of the bezel
off the chassis (2), then the left side.
Figure 2-4
12
Chapter 2 Hardware Upgrades
Regardless of the power-on state, voltage is always present on the system
Removing the Front Bezel
ENWW