13.
Replace the slot cover retainer.
Figure 2-17
NOTE
14.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
15.
Replace the access panel.
16.
If the computer was on a stand, replace the stand.
17.
Reconnect the power cord and any external devices, then turn on the computer.
18.
Lock any security devices that were disengaged when the access panel was removed.
19.
Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the
Documentation and Diagnostics CD for instructions about using Computer Setup.
ENWW
Replacing the Slot Cover Retainer
The slot cover retainer is secured in place by the access panel.
Removing or Installing an Expansion Card
25