Product Overview - Toro HoverPro 550 Manual

Hide thumbs Also See for HoverPro 550:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Figure 15
4.
Insert the dipstick into the oil-filler neck, then
remove the dipstick.
5.
Check the oil level on the dipstick
Note:
If you overfill the engine with oil, drain
the excess oil; refer to
(page
20).
Figure 16
1. The oil level is at its
maximum.
2. The oil level is too
high—remove oil from
the crankcase.
6.
If the oil level is below the upper limit, wipe
the dipstick with a clean rag and repeat steps
3
through
5
until the engine-oil level is at the
upper limit mark.
7.
Insert the dipstick into the oil-filler neck and
hand tighten the dipstick securely.
g364716
(Figure
16).
Draining the Engine Oil
g364717
3. The oil level is too
low—add oil to the
crankcase.

Product Overview

1. Handlebar
2. Operator-presence bail
3. Mower deck
1. Recoil-starter grip
2. Spark plug
3. Air cleaner
4. Fuel-shutoff valve
9
Figure 17
4. Handlebar footstop
5. Handlebar knobs
Figure 18
5. Fuel cap
6. Dipstick
7. Muffler guard
g364714
g364713

Advertisement

Table of Contents
loading

This manual is also suitable for:

02617

Table of Contents