Release L.10.09; Release L.10.10; Release L.10.11 - HP ProCurve J8766A Release Note

For the procurve series 4200vl switches
Hide thumbs Also See for ProCurve J8766A:
Table of Contents

Advertisement

Release L.10.09

Problems Resolved in Release L.10.09
802.1X (PR_1000353479) — Changing the supplicant start period (e.g., "aaa port-access
supplicant A1 start-period 15" ) corrupts the supplicant password on a switch that is configured
as a supplicant.
Enhancement (PR_1000360934) — Added DHCP Protection enhancement for switch
4200vl.

Release L.10.10

Problems Resolved in Release L.10.10
802.1x (PR_1000358534) — For the Controlled Directions feature of 802.1X to operate
correctly, spanning tree must be enabled and authenticator ports must be set as edge ports.
This fix removes a limitation that requires these steps be done in a specific order.
CLI (PR_1000358129) — The command line interface (CLI) becomes unresponsive after
running RMON traps code.
Enhancement (PR_1000351445) — The "show tech transceiver" CLI command output now
contains the HP part number and revision information for all transceivers on the switch.
Source Port Filtering (PR_1000352851) — Source Port Filtering on trunks does not work
when both the source and destination are trunk ports, even though the switch accepts the
configuration.
Trunking (PR_1000364354) — When a switch with 30 or more trunks is rebooted, the
switch may crash with a message similar to:
NMI event SW:IP=0x00456520 MSR:0x0000b032 LR:0x004564d0
Task='mLpmgrCtrl' Task ID=0x150d940 cr: 0x48000042 sp:0x0150d468
xer:0x00000000

Release L.10.11

Problems Resolved in Release L.10.11
Crash (PR_1000368540) — Switch may crash with a message similar to:
Software exception at parser.c:8012 -- in 'mSess2', task ID =
0x90e10e0 -> ASSERT: failed.
Hang (PR_1000346328) — RMON alarms/events configuration files may become corrupt
and prevent initialization, resulting in failure to boot.
RADIUS (PR_1000358525) — Attributes that were overridden by RADIUS (CoS, Rate, and
ACL) remain active if an authenticated user fails to send EAP-LOGOFF.
Software Fixes in Release L.10.01 - L.11.09
(not a general release)
(not a general release)
Release L.10.09
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 4200vlL.11.09

Table of Contents