Release L.10.10 Enhancements; Release L.10.11 Enhancements - HP ProCurve J8766A Release Note

Enhancements

Release L.10.10 Enhancements

Attempt to release address <ip-address> leased to port <port-number> detected on port
<port-number> dropped. Indicates an attempt by a client to release an address when a DHCPRE-
LEASE or DHCPDECLINE packet is received on a port different from the port the address was
leased to.
Ceasing bad release logs for %s. More than one bad DHCP client release packet was dropped. To
avoid filling the log file with repeated bad release dropped packets, bad releases will not be logged
for <duration>.
Lease table is full, DHCP lease was not added. The lease table is full and this lease will not be
added to it.
Write database to remote file failed errno (error-num). An error occurred while writing the
temporary file and sending it using tftp to the remote server.
DHCP packets being rate-limited. Too many DHCP packets are flowing through the switch and
some are being dropped.
Snooping table is full. The DHCP binding table is full and subsequent bindings are being dropped.
Release L.10.10 Enhancements
Release L.10.10 includes the following enhancements:
Enhancement (PR_1000351445) — The "show tech transceiver" CLI command output now
■
contains the HP part number and revision information for all transceivers on the switch.

Release L.10.11 Enhancements

No enhancements, software fixes only.
NOTE: Versions L.10.12 through L.10.19 were never built. The code branched to L.10.20 with no
intervening releases.
44