Release L.10.09 Enhancements; Dhcp Snooping Overview; Enabling Dhcp Snooping - HP ProCurve J8766A Release Note

For the procurve series 4200vl switches
Hide thumbs Also See for ProCurve J8766A:
Table of Contents

Advertisement

ProCurve(config)# aaa port-access authenticator a10
ProCurve(config)# aaa authentication port-access eap-radius
ProCurve(config)# aaa port-access authenticator active
ProCurve(config)# aaa port-access a10 controlled-directions in
Figure 1-9. Example of Configuring 802.1X Controlled Directions

Release L.10.09 Enhancements

Added DHCP Protection enhancement (DHCP Snooping) for switch 4200vl.

DHCP Snooping Overview

You can use DHCP snooping to help avoid the Denial of Service attacks that result from unauthorized
users adding a DHCP server to the network that then provides invalid configuration data to other
DHCP clients on the network. DHCP snooping accomplishes this by allowing you to distinguish
between trusted ports connected to a DHCP server or switch and untrusted ports connected to end-
users. DHCP packets are forwarded between trusted ports without inspection. DHCP packets
received on other switch ports are inspected before being forwarded. Packets from untrusted sources
are dropped. Conditions for dropping packets are shown below.
Condition for Dropping a Packet
A packet from a DHCP server received on an untrusted port DHCPOFFER, DHCPACK,
If the switch is configured with a list of authorized DHCP
server addresses and a packet is received from a DHCP
server on a trusted port with a source IP address that is not
in the list of authorized DHCP server addresses.
Unless configured to not perform this check, a DHCP packet
received on an untrusted port where the DHCP client
hardware address field does not match the source MAC
address in the packet
Unless configured to not perform this check, a DHCP packet
containing DHCP relay information (option 82) received from
an untrusted port
A broadcast packet that has a MAC address in the DHCP
binding database, but the port in the DHCP binding database
is different from the port on which the packet is received

Enabling DHCP Snooping

DHCP snooping is enabled globally by entering this command:
Packet Types
DHCPNACK
DHCPOFFER, DHCPACK,
DHCPNACK
N/A
N/A
DHCPRELEASE,
DHCPDECLINE
Enhancements
Release L.10.09 Enhancements
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 4200vlL.11.09

Table of Contents