Radius Server Unavailable - HP ProCurve J8766A Release Note

Enhancements
Release L.11.08 Enhancements
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Informs [Yes] : Yes
Address
---------------------- ---------------- -----------------
--
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Figure 3. Example Showing SNMP Informs Option Enabled

RADIUS Server Unavailable

Overview
In certain situations, RADIUS servers can become isolated from the network. Users are not able to
access the network resources configured with RADIUS access protection and are rejected. To
address this situation, configuring the "authorized" secondary authentication method allows users
unconditional access to the network when the primary authentication method fails because the
RADIUS servers are unreachable.
Configuring RADIUS Authentication
You can configure the switch for RADIUS authentication through the following access methods:
Console: Either direct serial-port connection or modem connection.
■
■ Telnet: Inbound Telnet must be enabled (the default).
■ SSH: To use RADIUS for SSH access, first configure the switch for SSH operation.
94
MIB View Write Access
Manager Unrestricted
| Community
: Default rfc1517
: Default rfc1517
Events Sent in Trap