Table of Contents
Advertisement
Figure 25. Installing caster wheels
Next steps
1. Follow the procedure listed in
Drives
Removing a drive blank
The procedure for removing 2.5 inch and 3.5 inch drive blanks is identical.
Prerequisites
1. Follow the safety guidelines listed in
2. If installed,
remove the front bezel.
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
CAUTION:
Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Press the release button, and slide the drive blank out of the drive slot.
34
Installing and removing system components
Before working inside your system
Safety instructions
on page 28.
on page 27.
Advertisement
Table of Contents
