Settings - AEG AWF8024M3SB User Manual

Table of Contents

Advertisement

At the end of the Vapour cycle, the
clothes will be warmer, softer and
detached from the drum.
NOTE
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may notice
vapour exiting from the drain hose of
the washing machine, this is normal
and there is no cause for alarm.

3.5 Settings

Child Safety Lock (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to
the appliance.
Set this option after pressing the
Start/Pause touchpad.
To set "Child Lock" option:
To activate the function, press and
hold "Hygienic Care" touchpad about
2 seconds until the display shows the
icon "
".
If you press any touchpad while
Child Lock is activated, the icon
"
" will flash on display
3 times along with buzzer sound.
This function remains enabled
even after the appliance is
switched off.
To deactivate the function, press and
hold "Hygienic Care" touchpad about
2 seconds until the display shows the
icon "
".
) Option
Enabling/Disabling End-Of-Wash
Buzzer
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finished approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as critical
faults are not disabled.
To disable the buzzer sound, press
"Temp" and "Spin" touchpads
at the same time about 3 seconds,
the icon "
" will show on display
along with buzzer sound.
To return to default configuration press
these 2 touchpads at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
15
" will

Advertisement

Table of Contents
loading

Table of Contents