To Install The System Memory - JETWAY A210GDAG User Manual

2-4 To install the system memory

This motherboard provides
for memory expansion available from minimum memory size of 64MB to maximum memory size
of 4.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1) PC2100/PC2700/PC3200 DDR SDRAM
Bank 2, 3 (DIMM2) PC2100/PC2700/PC3200 DDR SDRAM
Bank 4, 5 (DIMM3) PC2100/PC2700/PC3200 DDR SDRAM
Bank 6, 7 (DIMM4) PC2100/PC2700/PC3200 DDR SDRAM
Total
NOTE! Make sure the total installed memory does not exceed 4.0GB, otherwise the system
may hang during startup.
Generally speaking, installing DDR SDRAM modules to your motherboard is very easy, you can
refer to figure 2-4 to see what a 184-Pin PC2100/PC2700/PC3200 DDR SDRAM module looks
like.
NOTE! When you install DIMM modules fully into the DIMM sockets the eject tab
should be locked into the DIMM modules firmly and fit to its indention on both
sides.
four 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites
184-Pin DIMM
System Memory (Max. 4.0GB)
DIMM1 & DIMM3: Dual Channel 1
DIMM2 & DIMM4: Dual Channel 2
PCS
X1
X1
X1
X1
4
9
Total Memory
64MB∼1.0GB
64MB∼1.0GB
64MB∼1.0GB
64MB∼1.0GB
64MB∼4.0GB
Figure 2-4