Yamaha MG Series Owner's Manual page 26

Controls and Connectors
u [SEND MASTER] section
(*) Only MG20XU, MG20, MG16XU, MG16X and MG16
AUX1
AUX2
AUX3
(*)
AUX4
MG20XU/MG20/MG16XU/MG16X/MG16: [AUX1 – 4] knobs
MG12XU/MG12X/MG12: [AUX1 – 2] knobs
MG20XU/MG20
MG16XU/MG16X/MG16
For adjusting the levels of the signals output to the [SEND]
jacks and [AUX1 – 4].
26
MG20XU/MG20/MG16XU/MG16X/MG16/MG12XU/MG12X/MG12 Owner's Manual
SEND AUX1
[+4dBu]
SEND AUX2
[+4dBu]
SEND AUX3
[+4dBu]
SEND AUX4
[+4dBu]
MG12XU/MG12X/MG12
i [GROUP] section
(*) Only MG20XU, MG20,
MG16XU, MG16X and MG16
GROUP 1-2
ON
GROUP 3-4
ON
(*)
• [ON] switch
Turn this switch on (
fader. The switch lights when on.
• [GROUP 1-2] fader
For adjusting the level of the signal output to the
[GROUP OUT 1, 2] jacks.
• [GROUP 3-4] fader (MG20XU/MG20/MG16XU/
MG16X/MG16)
For adjusting the signal level to the [GROUP OUT 3, 4]
jacks.
• [ST] switch
If this switch is on ( ), the signals are sent to the
STEREO L/R bus via the [GROUP 1-2, 3-4] faders.
The GROUP 1 and 3 signal goes to the STEREO L
bus, and the GROUP 2 and 4 signal goes to the STE-
REO R bus.
G1 MONI
G2 MONI
GROUP OUT 1
[+4dBu]
ST
GROUP OUT 2
[+4dBu]
GROUP OUT 3
[+4dBu]
ST
GROUP OUT 4
[+4dBu]
G3 MONI
G4 MONI
) to activate the [GROUP]