Update Method 3: Manual Update Via A Usb Flash Drive - Sony MHC-V90W Help Manual

Help Guide
Home Audio System
MHC-V90W

Update method 3: Manual update via a USB flash drive

You can use a USB flash drive to update the software when the home audio system is not connected to the Internet.
Follow the steps below. Use the remote control to perform the steps below.
Stop any music that is being played.
1
Press FUNCTION button repeatedly to select [USB].
2
Download the update file from the website below, then store it in a USB flash drive.
3
For customers in the USA:
http://www.esupport.sony.com/
For customers in Canada:
http://esupport.sony.com/CA/
Connect the USB flash drive to the
4
Press OPTIONS button.
5
Press / button repeatedly to select [SYSTEM], then press
6
Press / button repeatedly to select [UPDATE], then press
7
Press
/ button repeatedly to select [VIA USB], then press
8
Press / button repeatedly to select [EXEC], then press
9
Press / button repeatedly to select [YES], then press
10
When updating starts, the information of the update's progress appears on the display. While updating, the home
audio system cannot be operated.
To exit the options menu, press OPTIONS button.
[UPDATED] appears on the display and the home audio system enters standby mode or BLUETOOTH/Network
standby mode automatically when the updating is completed.
When you turn on the home audio system for the first time after an update, [UPDATED] appears on the display.
Hint
During an update, the information of the update's progress appears on the display, and [UPDATED] appears on the display when
the update is complete. Do not turn the home audio system off during the update.
Note
(USB) port on the home audio system.
46
(enter) button.
(enter) button.
(enter) button.
(enter) button.
(enter) button.