Help Guide | Update Method 2: Manual Update Via The Internet - Sony SRS-HG1 Help Manual

Help Guide
Personal Audio System
h.ear go (SRS-HG1)
Update method 2: Manual update via the Internet
When the speaker is connected to the Internet via a Wi-Fi network, the UPDATE indicator on the speaker lights up in orange
when the speaker detects a new software version.
In this case, follow the steps below to update the software to the latest version.
When the update starts, any music being played will stop. Also, any BLUETOOTH connection is disconnected.
When the UPDATE indicator is lit in orange, press and hold the UPDATE/WPS button until beeps are
1
heard.
When the updating starts, the UPDATE indicator flashes in orange.
While updating, the speaker cannot be operated.
The UPDATE indicator turns off and the speaker switches to standby mode or BLUETOOTH/Network standby mode
automatically when the updating is completed.
When the speaker is turned on for the first time after updating, the UPDATE indicator flashes in orange three times.
If the (power) indicator flashes in red and the UPDATE indicator flashes in orange during
the update
The update has failed.
Turn off the speaker, then turn it on again. The update will resume. If the situation is not improved after switching the speaker off
and on, consult your nearest Sony dealer.
Hint
The number of flashes of the UPDATE indicator indicates the update's progress. The UPDATE indicator flashes four times at first, and decreases
by one flash, then turns off when the updating is completed. Do not turn the speaker off during the update.
Note
Updating normally takes 3 to 10 minutes. It may take longer depending on your network environment.
199