Fagor PB 4VI517FTB4SAC Series Instruction Manual page 55

OPERATION
Stop'n go function (pause II)
Stop'n go function acts like a pause. The Stop'n go function simultaneously suspends opera-
tion of all cooking zones and then resumes at the heat settings that were previously set.
In order to activate the Stop'n go function, at least one cooking zone must be in use.
Touch the sensor. All cooking zone displays will show the symbol. When a cooking zone
is hot the symbol will flash alternately with the letter "H" or "h", depending on cooking zone
temperature (residual heat indicator).
To deactivate the Stop'n go function touch the
will show the heat setting that was previously set before activation of the Stop'n go function.
Bridge function
The Bridge function allows pairing of two cooking zones into a single combined cooking zone.
The Bridge function is very convenient, especially when cooking in large pots such as a ba-
king pan.
The two left or two right cooking zones can be bridged.
To select the Bridge function:
• Turn on the hob.
• Place the baking pan on the left or right cooking zones.
• The pan will be automatically detected and the Bridge function will activate as indicated
by the symbol.
If you do not select heat setting within 10 seconds the Bridge function will be deacti-
vated.
• Select the desired heat setting by sliding your finger across the setting selection sensor
field
Now both cooking zones can be controlled at the same time.
sensor field again. Cooking zone displays
55