Fagor PB 4VI517FTB4SAC Series Instruction Manual page 47

OPERATION
For induction cooking us only ferromagnetic base materials such as:
●enamelled steel
● cast iron
● special stainless steel cookware designed for induction cooking.
Marking of kitchen
cookware
Stainless Steel
Aluminium
Cast iron
Enamelled steel
Glass
Porcelain
Cookware with copper
base
Cookware size.
● In order to achieve best cooking results, use cookware with bottoms (ferromagnetic part)
of the size corresponding to the size of the cooking zone.
● Using cookware with the bottom diameter smaller than the cooking zone size will reduce
the effectiveness of the cooking zone and increase cooking time.
● Cooking zones have a lower pot detection limit that depends on the diameter of ferromag-
netic part of the pot bottom and the pot material. The use of an unsuitable pot might lead
to pot being undetected by a cooking zone.
Check for marking indicating that the
cookware is suitable for induction
cooking.
Use magnetic cookware (enamelled steel, ferrite sta-
inless steel, cast iron). The easiest way to determine
if your cookware is suitable is to perform the „magnet
test". Find a generic magnet and check if it sticks to
the base of the cookware.
Cookware is not detected
With the exception of the ferromagnetic steel cookwa-
re
Cookware is not detected
High efficiency
Caution: cookware can scratch the hob surface
High efficiency
Cookware with a flat, thick and smooth base is recom-
mended
Cookware is not detected
Cookware is not detected
Cookware is not detected
47