Auxiliary Handle - Dremel US20V-02 Operating/Safety Instructions Manual

Dust Extraction
Your tool is equipped with a dust port
for dust extraction. To use this feature,
insert dust port adapter 21 (included)
into dust port 14, attach vacuum hose
22 (Not included) into the adapter, then
connect the opposite end of the hose to
a shop vacuum cleaner (Fig. 4).

Auxiliary Handle

The auxiliary handle is used to control
and balance the tool during operations.
The auxiliary handle 13 must be
threaded into mounting 12 on the tool
(Fig. 5). Alternatively, the body of the
tool can be grasped with both hands for
control.
Assembly
22
Fig. 5
-16-
Fig. 4
14
21
13
12